Lightweight. inoroanic silica and ceramic fibers with low thermal conductivity are used as raw materials. and aluminum foil with high reflectivity is used as the underlying material.
Category:
Nano Microporous Insulation Board
E-mail:
154872569@qq.com
Type 950 Nano Microporous Insulation Board Details
[Product descoriotion]
Lightweight. inoroanic silica and ceramic fibers with low thermal conductivity are used as raw materials. and aluminum foil with high reflectivity is used as the underlying material. The single-laver composite structure is formed by continuous coatin and composite pressing process, and its thermal conductivity is higher than that of static The air is smaller, and the thermal insulation performance is about 3 to 5 times better than that of traditional thermal insulation materials. It is the best thermal insulation material so far.
Nano thermal insulation board has ultra-low thermal conductivity, which can greatly save energy compared with the use of traditional thermal insulation materials.
[Typical application]
Ladle, ladle, tundish, converter, torpedo, fumace door, furnace cover, engine heat shield, power battery fire and heat insulation.
Different packaging methods are used, such as bare board/POF heat shrinkable film/aluminum foil paper, etc., to meet the application needs in diferent fields. At the same time, in the process of preparation of this material, no adhesive ingredients are used, and the materials used are fully in line with various types of materials. Environmental requirements.
[Product Features and Functions]
High temperature resistance
Long-term use temperature of about 400 to 1000 degrees.
Thermal conductivity
2 to 10 times lower than conventional thermal insulation materials, only 0.035w/m.k at 800 degrees.
Durability
Can be used as a permanent layer of thermal insulation, witha service life of more than 5 to 10 years.
Safety and environmental protection
pure non-polar material combination, good thermal stability,no release of any harmful substances.
Economic Analysis
The price is lower than 50% of similar foreign products, andthe energy saving is 10-30% compared with conventional materials.
Product parameters
Semi-silica brick refers to an aluminum-silicon refractory product with a SiO2 content of greater than 65% and an Al2O3 content of 15% to 30%. They generally use clay containing quartz impurities or native kaolin refractory clay or tailings and pyroph...
The Al2O3 content of anchor bricks is above 55%, and some users require that the alumina content reach 75%, and the load softening temperature of 75% bricks reaches 1550C. However, in actual use, anchor bricks with high aluminum content cannot be enough. The key is Flexibility is the most important t...
Products Desc
Products Description The main components of alkali resistant bricks are clay, high alumina, quartz sand, bauxite and other alkali resistant materials, among which quartz sand and bauxite can improve alkali resistance, clay and high alumina can increase sintering pressure, so that alkali-resistant bri...
Professional solutions for you, ready for your choice
Copyright © Zibo Lifa Refractory Materials Factory ALL RIGHTS RESERVED
Technical Support: JinZhao E-commerce