Clay castable is made of refractory clay clinker as aggregate, with aluminum oxide powder and soft clay binder added. It is prepared according to the proportion of formula and mixed by a blender for more than 5 minutes. The general temperature of use is 1300-1450℃ Features 1. Good high temperature performance. 2. High strength at room temperature. 3. Good spalling resistance. 4. Good plasticity. Production process: material selection - ingredients - mixing - packing - storage 1, material selection is a very important process, is an important link to ensure its production, according to the for
Keywords:
Category:
Monolithic Refractory
E-mail:
154872569@qq.com
Clay Castable Details
Clay castable is made of refractory clay clinker as aggregate, with aluminum oxide powder and soft clay binder added. It is prepared according to the proportion of formula and mixed by a blender for more than 5 minutes. The general temperature of use is 1300-1450℃
Features
1. Good high temperature performance.
2. High strength at room temperature.
3. Good spalling resistance.
4. Good plasticity.
Production process: material selection - ingredients - mixing - packing - storage
1, material selection is a very important process, is an important link to ensure its production, according to the formula and use of suitable refractory clay castable aggregate, powder, binder, additive.
2. The batching is to select the particle size of selected refractory raw materials according to their grades according to the formula, and strictly control the particle size of aggregate and powder.
3. When stirring, first stir the powder evenly and then stir the aggregate evenly. Add the stirred powder to the aggregate and then mix and stir. Control the stirring time. The time should not be too short, generally 8-10 minutes.
4. Put the stirred clay castable into the ton bale, and equip with additives and binder, and then package.
5. The packed castable shall be stored in the warehouse, and the date shall be marked and treated as moisture-proof and waterproof
Precautions for Use
1. Strictly control the water consumption when making mud on site.
2. Pay attention to vibration time and vibration mode during construction.
3. Control the baking process after pouring and forbid the heating too fast to prevent the construction body from cracking.
Application
Soaking pit and steel rolling furnace, lining of various heat treatment furnace, boiler, shaft kiln, rotary kiln pre-tropical furnace, blast furnace, electric furnace, converter and other industrial kilns.
Physical And Chemical Indicators
Item |
Index |
|
Al2O3,% ≥ |
42 |
|
Bulk density,g/cm3 ≥ |
2.1 |
|
Compressive strength,Mpa ≥ |
110℃×24h |
30 |
1250℃×3h |
40 |
|
Rate of change of reburn line,% 1250℃×3h |
±0.5 |
Semi-silica brick refers to an aluminum-silicon refractory product with a SiO2 content of greater than 65% and an Al2O3 content of 15% to 30%. They generally use clay containing quartz impurities or native kaolin refractory clay or tailings and pyroph...
The Al2O3 content of anchor bricks is above 55%, and some users require that the alumina content reach 75%, and the load softening temperature of 75% bricks reaches 1550C. However, in actual use, anchor bricks with high aluminum content cannot be enough. The key is Flexibility is the most important t...
Products Desc
Products Description The main components of alkali resistant bricks are clay, high alumina, quartz sand, bauxite and other alkali resistant materials, among which quartz sand and bauxite can improve alkali resistance, clay and high alumina can increase sintering pressure, so that alkali-resistant bri...
Professional solutions for you, ready for your choice
Copyright © Zibo Lifa Refractory Materials Factory ALL RIGHTS RESERVED
Technical Support: JinZhao E-commerce