prevnext

Ceramic Lining Bricks

The ceramic lining brick is pressed and formed by a bidirectional hydraulic press and sintered in a high temperature natural gas kiln. The inner and outer structure of wear-resistant ceramic lining bricks is uniform and consistent and has been tested

Keywords：

Category：

Industrial Ceramic

E-mail:

154872569@qq.com

Inquiry

Ceramic Lining Bricks Details

Product Description

Ceramic lining bricks have the characteristics of high strength, high fracture toughness, low wear, good regularity, impact resistance, abrasion resistance, scientific formulation, dry pressing and high temperature firing. The Mohs hardness is 9, second only to diamond. The construction is convenient, the theoretical wear resistance is 300 times that of manganese steel, and the service life can generally reach 10 times.

Features

Ceramic lining brick features:

1.The main component is high-quality alumina with a content of 92%, with high purity, which can greatly reduce the pollution to the grinding materials.

2.Good wear resistance, wear resistance is 266 times that of manganese steel, effectively prolonging the service life of machinery and equipment.

3.The slurry produced by the wear-resistant ceramic lining brick and high-alumina ball is fine.

4.has the characteristics of corrosion resistance, high density and high mechanical strength.

Application

Wear-resistant ceramic lining brick is an anti-wear product embedded in the inner wall of the ball mill. It can also be used in refractory materials, electronics, ceramics, and high-temperature kilns, which can effectively improve grinding efficiency, reduce grinding costs, and reduce product pollution.

Physical And Chemical Indicators

Brand Properties		ALB-92	ALB-92S	ALB-95
Al2O3(%)		≥92	≥92	≥95
Bulk density(g/cm3)		≥3.65	≥3.68	≥3.68
Wear Loss(%)		≤0.01	≤0.008	≤0.01
Hardness(Mohs)		9	9	9
Water Absorption(%)		≤0.01	≤0.01	≤0.01
Color		white	white	white
Size	Length(mm)	(W1) Width (mm)	(W2) Width (mm)	(H) Height (mm)
End Flat Brick	150	50	50	40/50/60/ 70/77/90
Circle Brick	150	50	45
Half End Flat Brick	75	50	50
Half Circle Brick	75	50	45
Flake Brick	150	25	22.5
Size can be customized

PREVIOUS：Bulletproof Alumina Insert Plate

NEXT：Honeycomb Ceramics

Semi-Silica Brick

Semi-silica brick refers to an aluminum-silicon refractory product with a SiO2 content of greater than 65% and an Al2O3 content of 15% to 30%. They generally use clay containing quartz impurities or native kaolin refractory clay or tailings and pyroph...

Anchor Brick

The Al2O3 content of anchor bricks is above 55%, and some users require that the alumina content reach 75%, and the load softening temperature of 75% bricks reaches 1550C. However, in actual use, anchor bricks with high aluminum content cannot be enough. The key is Flexibility is the most important t...

Sic Mullite Brick

Products Description The working layer of sic mullite brick is made of high-quality super bauxite and silicon carbide as the main raw materials and the heat insulation layer is made of aluminum silicate material with low thermal conductivity ...

Alkali Resistant Brick

Products Description The main components of alkali resistant bricks are clay, high alumina, quartz sand, bauxite and other alkali resistant materials, among which quartz sand and bauxite can improve alkali resistance, clay and high alumina can increase sintering pressure, so that alkali-resistant bri...