Various forms of anchorage on the back of the folding module in the composite ceramic fiber module enable the folding module to be installed in a square array arrangement or a parquet panel arrangement. Features: The folding blankets will squeeze each
Keywords:
Category:
Insulation Thermal Material
E-mail:
154872569@qq.com
Composite Ceramic Fiber Module Details
Various forms of anchorage on the back of the folding module in the composite ceramic fiber module enable the folding module to be installed in a square array arrangement or a parquet panel arrangement.
Features:
The folding blankets will squeeze each other in different directions without creating gaps after being unstrapped.
Elastic ceramic fiber blanket can resist mechanical forces
The elasticity of the ceramic fiber blanket compensates for the deformation of the furnace shell so that there are no gaps between the components
Because of its light weight, it absorbs very little heat when used as insulation.
Low thermal conductivity brings high energy saving.
It is capable of resisting any thermal shock.
The lining does not require drying or curing, so it can be used immediately after installation.
The anchoring system is located away from the hot side of the assembly, keeping the metal anchoring at relatively low temperatures
Application:
1. Furnace lining of kiln in petrochemical industry;
2. metallurgy industry furnace lining;
3. ceramic, glass and other building materials industry furnace lining;
4. Lining of heat treatment furnace in heat treatment industry
5. other industrial furnace lining.
Physical And Chemical Indicators:
Brand |
STD Module |
HP Module |
HZ Module |
|
ChemicalComposition(%) |
Al2O3 |
≥44 |
≥45 |
≥34 |
SiO2 |
≥52 |
≥54 |
≥50 |
|
Fe2O3+TiO2 |
≤1.0 |
≤0.5 |
≤0.5 |
|
ZrO2 |
- |
- |
≥15 |
|
K2O+Na2O+Fe2O3 |
≤1.0 |
≤0.2 |
≤0.2 |
|
Bulk Density (kg/m3) |
220 |
220 |
220 |
|
Specification Temp. (℃) |
1260 |
1350 |
1430 |
|
Linear Shrinkage after Heatin(%) |
1000℃X24h≤2.5 |
1000℃X24h≤2.5 |
1000℃X24h≤3.5 |
|
Thermal Conductivity(w/m.k) |
400℃ |
0.09 |
0.101 |
0.118 |
500℃ |
0.119 |
0.12 |
0.149 |
|
600℃ |
0.152 |
0.175 |
0.172 |
Semi-silica brick refers to an aluminum-silicon refractory product with a SiO2 content of greater than 65% and an Al2O3 content of 15% to 30%. They generally use clay containing quartz impurities or native kaolin refractory clay or tailings and pyroph...
The Al2O3 content of anchor bricks is above 55%, and some users require that the alumina content reach 75%, and the load softening temperature of 75% bricks reaches 1550C. However, in actual use, anchor bricks with high aluminum content cannot be enough. The key is Flexibility is the most important t...
Products Desc
Products Description The main components of alkali resistant bricks are clay, high alumina, quartz sand, bauxite and other alkali resistant materials, among which quartz sand and bauxite can improve alkali resistance, clay and high alumina can increase sintering pressure, so that alkali-resistant bri...
Professional solutions for you, ready for your choice
Copyright © Zibo Lifa Refractory Materials Factory ALL RIGHTS RESERVED
Technical Support: JinZhao E-commerce