Products Description Refractory spray material is a kind of unshaped refractory material, which is a new type of refractory material with good fluidity after adding water and stirring without firing and pressing. Its masonry structure has fewer joints, strong integrity, good airtightness, and can avoid powder infiltration. In principle, any kind of castable or any kind of self-flowing material and pumping material can be used as dry spraying material or wet spraying material, just adjust the particle size composition and the type and amount of additives. Features Refractory Spray Materials Are
Keywords:
Category:
Monolithic Refractory
E-mail:
154872569@qq.com
Refractory Spray Materials Details
Refractory spray material is a kind of unshaped refractory material, which is a new type of refractory material with good fluidity after adding water and stirring without firing and pressing. Its masonry structure has fewer joints, strong integrity, good airtightness, and can avoid powder infiltration.
In principle, any kind of castable or any kind of self-flowing material and pumping material can be used as dry spraying material or wet spraying material, just adjust the particle size composition and the type and amount of additives.
1.It is easy to anchor and can effectively prevent the wall from protruding.
2.The construction is convenient, the labor intensity is low, the masonry efficiency is high, and the furnace can be mechanized.
3.The delivery time is short, which can reduce the inventory and cost accordingly.
Project | RSM-1 | RSM-2 |
Al₂O₃ | 45 | 35 |
SiO₂ | 40 | 50 |
Bulk Density(g/cm³) | 1.3 | 0.55 |
Maximum operating temperature(℃) | 1350 | 1100 |
Compressive strength(Mpa)110℃drying | 8 | 1±10%(1100℃*3h) |
Compressive strength(Mpa)1200℃*3h | 10 | |
Thermal Conductivity≤(W/m*k) | 0.3 | 0.15 |
1.Appropriate amount of water should be added
2.The air pressure and air volume of the injection should be appropriate
3.The distance and angle between the nozzle of the spray gun and the surface to be sprayed should be appropriate: the spray gun should be moved up and down, left and right to ensure that the thickness of the sprayed layer is uniform.
4.The thickness of each spray should not be too thick: too thick is easy to peel off, generally not more than 50mm.
5.Control the plasticity and coagulation of the material: the material can be well adsorbed on the spray coating, and can be solidified quickly to obtain a certain strength.
Refractory spray material can be used in various industrial furnaces, especially as the main material for repairing metallurgical furnaces. In the process of metal smelting, due to the wide use of this material for timely and reasonable gunning of metallurgical furnaces, the life of the furnace lining has been significantly improved. The erosion surface of the furnace lining is large, and the wet method is better for hot gunning, and the dry method is more used to fill the severely eroded parts.
Semi-silica brick refers to an aluminum-silicon refractory product with a SiO2 content of greater than 65% and an Al2O3 content of 15% to 30%. They generally use clay containing quartz impurities or native kaolin refractory clay or tailings and pyroph...
The Al2O3 content of anchor bricks is above 55%, and some users require that the alumina content reach 75%, and the load softening temperature of 75% bricks reaches 1550C. However, in actual use, anchor bricks with high aluminum content cannot be enough. The key is Flexibility is the most important t...
Products Desc
Products Description The main components of alkali resistant bricks are clay, high alumina, quartz sand, bauxite and other alkali resistant materials, among which quartz sand and bauxite can improve alkali resistance, clay and high alumina can increase sintering pressure, so that alkali-resistant bri...
Professional solutions for you, ready for your choice
Copyright © Zibo Lifa Refractory Materials Factory ALL RIGHTS RESERVED
Technical Support: JinZhao E-commerce